Edimax CAP1200 User Manual page 131

Radio Group Settings
Wireless
Band
Auto Pilot
Auto Pilot Range
Auto Pilot Interval
Channel Bandwidth
BSS BasicRateSet
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access points.
Advanced Settings
Contention Slot
Enable or disable the access point group's
2.4GHz or 5GHz wireless radio. When
disabled, no SSIDs on that frequency will be
active.
Select the wireless standard used for the
access point group. Combinations of 802.11b,
802.11g, 802.11n & 802.11ac can be selected.
Enable/disable auto channel selection. Auto
channel selection will automatically set the
wireless channel for the access point group's
2.4GHz or 5GHz frequency based on
availability and potential interference. When
disabled, select a channel manually.
Select a range from which the auto channel
setting (above) will choose a channel.
Specify a frequency for how often the auto
channel setting will check/reassign the
wireless channel. Check/uncheck the "Change
channel even if clients are connected" box
according to your preference.
Set the channel bandwidth or use Auto
(automatically select based on interference
level).
Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
Select "Short" or "Long" – this value is used for
contention windows in WMM (see IV-6-7.
WMM).
125
Edimax Pro NMS