Iv-6. Local Network; Iv-6-1. Network Settings; Iv-6-1-1. Lan-Side Ip Address - Edimax CAP1200 User Manual

IV-6. Local Network

IV-6-1. Network Settings

IV-6-1-1. LAN-Side IP Address

The "LAN-side IP address" page allows you to configure your AP Controller on
your Local Area Network (LAN). You can enable the access point to
dynamically receive an IP address from your router's DHCP server or you can
specify a static IP address for your access point, as well as configure DNS
servers. You can also set your AP Controller as a DHCP server to assign IP
addresses to other devices on your LAN.
The access point's default IP address is 192.168.2.2
Disable other DHCP servers on the LAN if using AP Controllers
DHCP Server.
LAN-side IP Address
IP Address
Assignment
Static IP Address
IP Address
Select "Static IP" to manually specify a
static/fixed IP address for your access point.
Select "DHCP Client" for your access point to
be assigned a dynamic IP address from your
router's DHCP server, or select "DHCP Server"
for your access point to act as a DHCP server
and assign IP addresses on your LAN.
Specify the IP address here. This IP address
will be assigned to your access point and will
150
Edimax Pro NMS