Edimax CAP1200 User Manual page 127

Auto Pilot Range
Auto Pilot Interval
Channel Bandwidth
BSS BasicRateSet
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access point.
Advanced Settings
Contention Slot
Preamble Type
Guard Interval
channel selection will automatically set the
wireless channel for the access point's 2.4GHz
or 5GHz frequency based on availability and
potential interference. When disabled, select
a channel manually.
Select a range from which the auto channel
setting (above) will choose a channel.
Specify a frequency for how often the auto
channel setting will check/reassign the
wireless channel. Check/uncheck the "Change
channel even if clients are connected" box
according to your preference.
Set the channel bandwidth or use Auto
(automatically select based on interference
level).
Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
Select "Short" or "Long" – this value is used for
contention windows in WMM (see IV-6-7.
WMM).
Set the wireless radio preamble type. The
preamble type in 802.11 based wireless
communication defines the length of the CRC
(Cyclic Redundancy Check) block for
communication between the access point and
roaming wireless adapters. The default value is
"Short Preamble".
Set the guard interval. A shorter interval can
improve performance.
121
Edimax Pro NMS