Message Alert Tone; Message Recording Time - AT&T CL82143 Abridged User Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds.
alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/
2. Press q or p
CID
3. Press q or p
CID
4. Press q or p
CID
/SELECT.
MENU
5. Press q or p
CID
/SELECT to save the setting.
6. Press
MENU

Message recording time

You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
1. When the handset is in idle mode, press MENU/
Press q or p
2.
CID
3. Press q or p
CID
Press q or p
4.
CID
Press q or p
5.
CID
/SELECT to save the setting.
press
MENU
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to >Msg alert tone, then press
DIR
to choose >On or >Off.
DIR
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to >Recording time, then press
DIR
to choose >3 minutes, >2 minutes, or >1 minute, then
DIR
SELECT
SELECT
32
By default, the message
to enter the main menu.
/SELECT.
MENU
/SELECT.
MENU
to enter the main menu.
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU