Table of Contents
Advertisement
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day of
the week can be calculated from the caller ID information.
When the handset is in idle mode, press MENU/
1.
2.
Press q
or p
CID
3.
Enter the month using the dialing keys.
4.
Enter the day using the dialing keys.
5.
Enter the year using the dialing keys, then press
set the time.
6.
Enter the hour using the dialing keys.
7.
Enter the minute using the dialing keys.
Press q
or p
8.
CID
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and day
not set," before it plays the message.
LCD language
You can select English, French, or Spanish to be used for all screen displays.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press MENU/SELECT.
3. Press MENU/SELECT to choose >LCD language.
4. Press qCID or pDIR to scroll to the desired language, then press MENU/SELECT.
The screen prompts Set English/Français/Español as LCD language?
5. Press
/SELECT to confirm.
MENU
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press MENU/
in idle mode, then enter 364#. There is a confirmation tone.
to scroll to >Set date/time and then press
DIR
to highlight AM or PM, then press
DIR
SELECT
MENU
MENU
10
to enter the main menu.
/SELECT.
MENU
/SELECT to move on to
/SELECT to confirm.
SELECT
Advertisement
Table of Contents
