Table of Contents
Advertisement
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the directory,
caller ID history or redial memory while you are on a call.
To access the directory or caller ID log while on a call:
Press MENU/
1.
Press q
or p
2.
CID
/SELECT.
MENU
Press q
or p
3.
CID
/SELECT to dial the number shown.
4.
Press
MENU
To access the redial list while on a call:
Press REDIAL/
1.
Press q
or p
2.
CID
repeatedly to show the last 10 recently dialed numbers. Press
dial the number shown.
Blind transfer
While on an outside call, you can transfer it
handset.
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/
2. Press
/SELECT to choose >Transfer.
MENU
•
If you have a two-handset system, the outside call is put on hold and your
handset screen shows Transferring call... The other handset rings and its
screen shows Transfer from other handset.
•
If you have more than two handsets, your screen shows TRANSFER TO:
Press
q
CID
/SELECT.
MENU
shows Transferring call... or Transferring call to all...
3. To answer the call on the destination handset, press
/SPEAKER, or any dialing key
shows Call transferred and goes to idle mode.
.
SELECT
to scroll to >Directory or >Caller ID log, then press
DIR
to scroll to the desired number.
DIR
to show the most recently dialed number.
PAUSE
to scroll to the desired number, or press REDIAL/
DIR
or p
to scroll to the desired handset and press
DIR
The outside call is put on hold and your handset screen
to a specific handset or any
.
SELECT
(0-9, TONE , or
18
MENU
PHONE/
FLASH
#). The original handset
PAUSE
/SELECT to
,
Advertisement
Table of Contents
