Reset Values; System Information; Speed Range; Pressure Range - Lowrance LMF-400 Installation And Operation Instructions Manual

Reset Values:

1. Press
MENU
2. Scroll down to
will appear: Press Enter to reset all values.
3. Press
ENTER
NOTE:
Resetting Values will not clear Engine/Tank configuration or the
settings of EP sensors previously calibrated or configured.

System Information

The system information screen provides information about the version
and build of the software in your LMF-400.
1. To access system information, select
Setup menu and press
displayed on the screen.
NOTE:
The System Setup menu for all three analog gauges feature Speed
Range and Pressure Range.

Speed Range

1. To access the Speed Range menu, press
quad analog page is on the main display.
2. Scroll down to
3. Select Speed Range and press
three options: 0-40, 0-80 and 0-120.
4. Choose the desired range and press
to the main display.

Pressure Range

1. To access the Pressure Range menu, press Menu when a single, dual
or quad analog page is on the main display.
2. Scroll down to
3. Select Pressure Range and press
Pressure Range menu, which five options: Engine Water Pressure,
Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure and
Transmission Oil Pressure.
4. Choose one of the options and press
the following PSI ranges: 0-15 psi, 0-30 psi, 0-60, 0-80 psi and 0-100 psi.
5. Select the desired range and press
to the main display.
, highlight
S
YSTEM
R V
ESET ALUES
to reset the values.
ENTER
S S
YSTEM ETUP
S S
YSTEM ETUP
and press
S
ETUP
and press
ENTER
S
YSTEM
. The system information will be
MENU
and press
ENTER
. The Speed Range menu has
ENTER
ENTER
and press
ENTER
ENTER
ENTER
ENTER
40
.
ENTER
. The following message
from the System
I
NFO
when a single, dual or
.
, which will take you back
.
, which will launch the
. A menu will appear with
, which will take you back