Fluid Level - Lowrance LMF-400 Installation And Operation Instructions Manual

Multi-function gauge
Table of Contents

Advertisement

To Change Engine (Reconfigure; active only with multiple-engine setting)
1. From a fuel flow menu, select
will call up an internal menu with three options: Port, Center and
Starboard. When you select one of the three options a message appears:
Changing Device Settings. When the LowranceNET has been scanned
and all devices have been detected, you will be directed back to the Bus
Device list.
To set Fuel Warning:
1. Highlight
F
the following options: Low Level or High Level.
2. After choosing either
Level Warning window will appear. It will be set to
When setting a Fuel Warning, you should choose
warn you when the fuel level drops below a preset percentage of the
tank's capacity.
3. To set the Fuel Warning level, use the
desired percentage and press
the Bus Devices list.
To Unset Engine (Unconfigure):
1. After highlighting
pop up: Press Ent to Unconfig Dev Instance.
Press
2.
ENTER
where UnCfg F Flow will now be displayed.
To Reset Values:
1. Choose
R
ESET
Press Enter to Reset Device Values.
2. Press
ENTER
NOTE:
By resetting values from the configuration menu, ONLY the device
selected from the Bus Devices list will be set back to its defaults.
When you Reset Values, the calibration on the device is reset. But
when you unconfigure a device, its calibration is unaffected.
WARNING:
If you reset any EP, that EP will lose all configuration
and calibration.

Fluid Level

Up to three tanks for each Fluid Level category (Fuel, Fresh Water, Oil,
Black Water, Waste Water and Live Well) can be supported by the
LMF-400. On the Bus Devices list, the fuel tanks will be displayed as
Fuel Tank (P) for portside, Fuel Tank (C) for center and Fuel Tank (S)
for starboard.
and press
W
UEL
ARNING
H
IGH
U
E
NSET
and you will be directed back to the Bus Devices list.,
, press
V
ALUES
to reset the device values to the default settings.
C
E
HANGE
NGINE
ENTER,
or
L
L
L
EVEL
OW
UP
. You then will be directed back to
ENTER
and pressing
NGINE
and a message will be displayed:
ENTER
22
and press
which opens a menu with
and pressing
EVEL
by default.
O
FF
L
L
OW
EVEL
and
keys to select a
DOWN
, a message will
ENTER
:
. That
ENTER
, a
ENTER
, which will

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents