Table of Contents
Advertisement
Tab pop up or highlight Set Threshold and press
Tab threshold. The threshold for Trim Tabs ranges from 3% to 50%.
Stay-on Time: By highlighting Stay-on Time you are able choose how
long the RPM, Engine Trim and Trim Tab pages will be displayed when
their respective thresholds have been exceeded. To set the duration of
each display, highlight
menu will appear, giving you the option to select a duration between 2
and 15 seconds. You need only set the Stay-on Time duration once since
it will affect all three categories (RPM, Engine Trim and Trim Tabs).
Basic menu with Screen highlighted (left). Screen option menu
Screen
To access the Screen menu:
1. Press
MENU
from which to choose: Backlight, Contrast and Reverse Video.
Adjusting Backlight:
1. Select
B
ACKLIGHT
backlight. A vertical adjustment bar will appear on the Set Backlight
window. If more than one gauge is on the bus, it will automatically
adjust the other gauge to the same setting.
2. Use the
UP
3. Press
EXIT
main display.
Adjusting Contrast:
You can adjust the Contrast in the same manner as the Backlight.
1. Select
C
ONTRAST
Contrast Adjust window.
2. Use the
UP
3. Press
EXIT
to the main display.
S
TAY
(center) with Set Backlight window (right).
, choose
S
CREEN
and press
and
keys to set the backlight to a desired level.
DOWN
to return to the Screen menu or
from the Screen menu and press
and
keys to move the slider bar to a desired level.
DOWN
to return to the Screen menu or press
and press
-
T
ON
IME
and press
ENTER
to adjust the brightness of the
ENTER
15
, to set a Trim
ENTER
The Set Time
ENTER.
. There are three options
to get back to the
ENTER
to launch the
ENTER
ENTER
to get back
Hide quick links:
Advertisement
Table of Contents
