Dual Analog; Quad Analog - Lowrance LMF-400 Installation And Operation Instructions Manual

NOTE
The System Setup menu for all three analog gauges feature Speed
Range and Pressure Range. A more detailed description of Speed
Range and Pressure range may be found under System Setup later
in this section.
Single Analog page (left) with Dual Analog page (right).

Dual Analog

A pair of analog gauges, the Dual Analog page may be customized to
show information from any of the following: Alt Voltage, Battery
Voltage, Engine Temperature, Atmospheric Pressure, Temperature,
Fluid Level, Paddle Wheel Speed, Pitot Speed, GPS Speed and
Tachometer.
To customize the Dual Analog page:
1. Scroll through the pages set for display by pushing the
key.
2. Once the Dual Analog page is displayed, press
and press
ENTER
3. A menu prompt will appear giving you the option to customize the
Top Gauge or the Bottom Gauge. Use the
highlight the desired gauge and press
4. Scroll through the device list and highlight the category you want to
monitor, then press
prompt. If you want to customize the other portion of half of the gauge
repeat the steps above, otherwise press
selected will be displayed on the screen.

Quad Analog

A display featuring four analog gauges, the Quad Analog page
supports: Alt
Atmospheric Pressure, Temperature, Paddle Wheel Speed, Pitot Speed,
GPS Speed and Tachometer.
.
. This will take you back to the menu
ENTER
Voltage, Battery
UP
.
ENTER
,
EXIT EXIT
Voltage,
32
ENTER
, select
MENU
and
DOWN
. The information you
Engine Temperature,
or
EXIT
C
USTOMIZE
keys to