Navigate To A Waypoint - Lowrance GlobalMap 5150C Operation Instructions Manual

3. Press ↓ to
change the first character, then press → to the next character and re-
peat until the latitude is correct. Press
4. Press ↓ to
change the first character, then press → to the next character and repeat
until the longitude is correct. Press
previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press |↑ to
WPT
press ; or, to look by name (and scroll through the entire waypoint
ENT
list), press ↓ to
2. If your waypoint list is a long one, you can spell out the waypoint name
in the
F B
IND Y
character, then press → to move the cursor to the next character and re-
peat until the name is correct, then press
3. If the list is short, you can jump directly to the
ing . Use ↑ or ↓ to select the waypoint name, press
ENT
point information screen appears with the
4. To begin navigating to the waypoint, press
|
L ENT
ATITUDE
|
L ENT
ONGITUDE
M W
Y AYPOINTS
| . For this example, look by name.
N ENT
AME
box to search for it. (Press ↑ or ↓ to change the first
N
AME
. Enter the latitude by pressing ↑ or ↓ to
ENT
. Enter the longitude by pressing ↑ or ↓ to
, then
ENT
| . To look up the nearest waypoint,
ENT
ENT
46
.
|
EXIT EXIT
to jump to the list below.)
F I L
IND N
ENT
command selected.
G T
O O
.
ENT
to return to the
box by press-
IST
and the way-