Electrical Requirements - Thermador PRD304GHC User And Care Manual

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS

Electrical Requirements

WARNING
ALWAYS DISCONNECT THE ELECTRICAL PLUG
FROM THE WALL RECEPTACLE BEFORE
SERVICING THIS UNIT.
CAUTION
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE CONNECTED TO A PROPERLY GROUNDED AND
POLARIZED ELECTRICAL POWER SUPPLY.
WARNING
IN CASE OF AN ELECTRICAL FAILURE
If for any reason a gas control knob is turned ON and
there is no electrical power to operate the electronic
igniters on the range's cooktop STAR
OFF the gas control knob and wait 5 minutes for the
gas to dissipate before lighting the STAR burner
manually.
To light the STAR burners manually, carefully hold a
lighted match to the STAR burner ports and turn the gas
.
control knob to HI
During a power failure, you can use the standard
cooktop STAR burners, but each must be lit with a
match.
DO NOT attempt to light the XLO STAR burners
manually. These STAR burners are equipped with the
®
ExtraLow feature and cannot be lit manually.
See the Installation Manual for electrical requirements and
grounding instructions.
It is recommended that a dedicated circuit servicing this
appliance be provided. See the Installation Manual for
electrical requirements and grounding instructions.
The use of gas cooking appliances results in the production
of heat and moisture.
It is the personal responsibility and obligation of you, the
user, to have this appliance connected to the electrical
power supply by a qualified electrician, in accordance with
the National Electrical Code and/or applicable local codes
and ordinances.
Important Safety Instructions
TESTED IN ACCORDANCE WITH:
•
•
•
•
Check your local building codes for the proper method of
installation. In the absence of local codes, this unit should
be installed in accordance with the National Fuel Gas Code
No. Z223.1 current issue and the National Electrical Code
ANSI/NFPA No. 70 current issue or the Can - B149
Installation Codes for Gas Burning Appliances and C22.1
Canadian Electrical Code Part 1.
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
®
Basic Safety Precautions
burners, turn
When properly cared for, your new range has been
designed to be a safe, reliable appliance. However, use
extreme care when using this restaurant caliber range as
this type of appliance provides intense heat. When using
kitchen appliances, basic safety precautions must be
followed, including the following:
Read this Use and Care Guide carefully before using your
new range, to reduce the risk of fire, electrical shock, or
injury to persons.
Ensure proper installation and servicing. Follow the
installation instructions provided with this product. Have the
range installed and electrically grounded by a qualified
technician.
Have the installer show you where the electric circuit
breaker and the gas supply shut off valve are located so
you know how and where to turn off the gas and electricity
to the range.
In the event a STAR
open a window or a door. DO NOT attempt to use the
range until the gas has had time to dissipate. Wait at least
5 minutes before using the range.
ANSI Z21.1, Household Cooking Appliances
CAN 1-1.1-M81, Domestic Gas Ranges
UL 858, Household Electric Ranges
CSA C22.2 No. 61, Household Cooking Ranges
®
burner goes out and gas escapes,
English 3