Océ 760C System Software; About Setup - Oce 760c Configuration Manual

3
3-7 Océ 760C system software
Océ 760C system software
The Océ 760C uses Windows NT Workstation system architecture to receive and
process jobs and send job data to the copier. To log on to the Océ 760C, enter
Administrator
Resident on the Windows NT Workstation is the following software unique to
the Océ 760C:
• Server—The Server is an independent software process started automatically
whenever Windows NT is booted. As the central element of Océ 760C system
software, the Server process controls the spooling, rasterizing, and printing of jobs,
as well as job accounting (the Job Log), storage, and retrieval.
When the Server is not running, jobs cannot be received by the Océ 760C, job
processing cannot occur, job data cannot be transferred to the copier for printing,
and Command WorkStation cannot connect to the Océ 760C. In the event that you
need to restart the Server process, right-click the FieryBar
• Command WorkStation—Command WorkStation is the interface tool for the
Server. It provides a graphical means of viewing and controlling Server functions.

About Setup

Setup configures the Océ 760C to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the Océ 760C after new
system software is loaded, or any time Server software is reinstalled. An initial Setup
using default settings is adequate for allowing users to print to the Océ 760C and to
use the Fiery WebTools. When your network or user printing environment changes,
you can change Setup options accordingly.
The first time you perform Setup, you must use the Océ 760C Control Panel.
Configure, at a minimum, Server Setup, Network Setup, and Printer Setup, in that
sequence. After the initial Setup, you can change Setup options from the Control Panel
(page 4-2) or Command WorkStation
any of these methods.
as the user name, and enter the password.
page
™
and choose Restart Fiery.
5-1. Most Setup options can be set using