Ethernet Connection; Token Ring Connection - Oce 760c Configuration Manual

1
1-11 Connecting network cable to the Océ 760C

Ethernet connection

For Ethernet connections, the Océ 760C supports Shielded Twisted Pair (STP)
cabling, defined as Category 5 for use with 100BaseT; or as Category 3, Category 4, or
Category 5 for use with 10BaseT. The cable uses an 8-pin RJ-45 connector that plugs
into the RJ-45 socket on the Océ 760C.
The 100BaseT type supported by the Océ 760C is 100BaseTX, also known as
N :
OTE
Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
"100BaseT" is used to refer to 100BaseTX.
T E
O CONNECT TO THE THERNET BOARD
• Connect the network cable to the RJ-45 connector on the back of the Océ 760C.
You must use a Category 5 unshielded twisted pair cable network cable for 100BaseT.

Token Ring connection

For Token Ring connections, the Océ 760C supports an RJ-45 connector and
Shielded Twisted Pair (STP) with a DB-9 connector.
If the Token Ring option is installed, you cannot enable both Ethernet and Token Ring
simultaneously. For more information, see
T T
O CONNECT TO THE OKEN
• Connect the network cable to the proper connector on the back of the Océ 760C.
R
ING BOARD
Appendix A.