Configuring A Windows Nt 4.0/2000 Server To Communicate With The Océ 760C - Oce 760c Configuration Manual

2
2-3 Océ 760C on a TCP/IP network with Windows NT 4.0/2000/XP
• For Windows NT 4.0/2000/XP, install the appropriate printer driver files on the
Windows NT 4.0/2000 server.
For more information, see the
• Repeat the installation for all users who print to the Océ 760C.
Each server and workstation running the Fiery utilities with TCP/IP also needs the
TCP/IP protocol and the Fiery utility software.
Configuring a Windows NT 4.0/2000 server to communicate with
the Océ 760C
To configure a Windows NT 4.0/2000 server to communicate with the Océ 760C,
follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.
• Load the TCP/IP network protocol on the server and configure it with an
IP address, subnet mask, and gateway.
• Enter the host name of the Océ 760C in the host database used by your system (see
page 2-4).
• Perform Océ 760C Setup.
• On the Windows NT 4.0/2000 server, create a printer for each Océ 760C print
connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see
• Enter the host name and remote printer name of the Océ 760C in the printer
connection. For more information, see
• If the Windows NT 4.0/2000 server is also a workstation, install Fiery utilities (see
the User Software Installation
User Software Installation
page 2-5).
page 2-18.
Guide).
Guide.