Chapter 6: Configuring Fiery Webtools; Configuring The Océ 760C And Clients For Fiery Webtools - Oce 760c Configuration Manual

6
6-1 Configuring the Océ 760C and clients for Fiery WebTools
Chapter 6:
Configuring
Fiery WebTools
T
O SET UP
1. In Océ 760C Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the Océ 760C, and then set the subnet mask.
3. Enable Web Services.
4. In Océ 760C Printer Setup, confirm that the Print Queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
Fiery WebTools allow you to manage your Océ 760C remotely from the Internet or
from your company's intranet. The Océ 760C has its own home page, from which you
can select a variety of functions, including Status, WebSpooler, WebLink, Installer,
WebScan, and WebDownloader.
For more information on using Fiery WebTools, see the
Configuring the Océ 760C and clients for
Fiery WebTools
Fiery WebTools provide access to many Océ 760C functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access
Fiery WebTools from a Windows or Mac OS computer.
F W T
IERY EB OOLS ON THE
Set a gateway address, if required.
F W T
IERY EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information on supported browsers and
Fiery WebTools requirements, see the
O 760C
CÉ
User Software Installation
Printing Guide.
Guide.