Printer Setup Options - Oce 760c Configuration Manual

4
4-42 Performing Setup from the Control Panel
T
O ACCESS PRINTER SETUP OPTIONS
1. In the main Setup menu, choose Printer Setup.
Exit Setup
Server Setup
Network Setup 2. Enter the options appropriate to the printing requirements at the site.
Printer Setup
Setup
3. When you have finished, save changes.

Printer Setup options

Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information on Océ 760C print connections,
see page 3-1.
In the list of options that follows, default values, where applicable, appear in brackets.
For users to use the Fiery utilities and Fiery WebTools or print to the Océ 760C
N :
OTE
over a TCP/IP network, you must publish at least the Hold queue or the Print queue.
Publish Direct Connection
Yes/No [Yes]
This option allows users to print (or download) jobs to the Océ 760C without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the Océ 760C, you must publish the Direct
connection.
Publish Print Queue
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the Océ 760C disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
Publish Hold Queue
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.