Fiery Webtools - Oce 760c Configuration Manual

3
3-4 Preparing for Océ 760C Setup

Fiery WebTools

The Océ 760C can support Internet or intranet access with Fiery WebTools from
Windows computers. To enable use of Fiery WebTools, you must do the following in
Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the Océ 760C.
• Enable Web Services.
For more information, see
You can set passwords to control access to Fiery WebTools features. If you do not
specifically set these passwords, all users have access to all Fiery WebTools functions
(see page 3-3). Fiery WebTools include Status
™
and Installer
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the Océ 760C. It is not affected by passwords. For more information, see
the Printing Guide.
WebSpooler
The WebSpooler interface is very similar to that of Command WorkStation. It allows
remote users to preview, manipulate, reorder, reprint, and delete jobs currently
spooling, processing, or printing on the Océ 760C. It also allows the administrator and
operator to edit and merge jobs (Thumbnails A and B) and view, print, or delete the
Job Log.
Fiery WebSpooler access can be controlled by setting an Operator password in Setup.
If you set a password, only users with that password can manipulate jobs from
Fiery WebSpooler. A user who does not have the password can still log in to
Fiery WebSpooler as a Guest with view-only access (see
information, see the
Chapter 6.
.
Job Management Guide.
™ ™
, WebSpooler, WebLink
page 3-3). For more
™
, WebScan ,