Configuring A Netware 4.X Server For Printing - Oce 760c Configuration Manual

2
2-10 Setting up Network Servers
You do not need to rerun Setup when you add or remove a NetWare queue; however,
you should restart the Océ 760C after you create or remove a queue.
When the Océ 760C is configured to connect to a NetWare server, it polls the
NetWare server for jobs in each of its queues. If jobs are found, they are automatically
transferred over the network to the matching connection on the Océ 760C. For
example, jobs from the NetWare queue with the
Océ 760C Print queue. While a job is processed and printed, a record of the job is
being created. You can access the Job Log containing these records at any time.
Configuring a NetWare 4.x server for printing
The following sections explain how to set up a NetWare file server so networked users
can print to the Océ 760C from their workstations, and the Océ 760C can obtain
print jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare 4.x installations, set up an NDS connection (see
• For NetWare 4.x in emulation mode, set the bindery context (see
• For NetWare 4.x in bindery emulation, set up a file server, print server, and print
queue for the Océ 760C (see
With bindery services, you can route all Océ 760C print jobs through the same
NetWare file server, or you can configure more than one file server to handle
Océ 760C jobs.
The functions you perform on the Novell server, the Océ 760C, and the client
workstation are summarized in the following tables. The first table applies to NDS
connections, and the second to bindery connections. Complete the operations in the
left column, then the center column, then the right column.
extension are sent to the
_print
page 2-13).
page 2-12).
page 2-12).