Turning The Set On/Off; First Installation Wizard - Loewe 46, 40 Operating Instructions Manual

Initial installation

Turning the set on/off

Switching the TV set to standby mode
Activate the mains switch on the bottom left of the set.
The display in the control panel on the front of the set
will be illuminated red, the set is now in standby mode.
Switching the TV on/off on the control unit
Press the on/off button in the middle for about  seconds
to switch the TV set on/off.
Display
Meaning of the display colour:
Red: Standby mode
Green: TV set is switched on
Orange: R adio mode, TV set receives EPG data or timer
recording active
Switching the set on with the remote control
Press the on/off button.
or:
numeric buttons (0–99).
or:
TV button.
or:
OK button – station list is called.
Switching the set off with the remote control
Press the on/off button.
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Switching on/switching to radio mode
Press R on the TV control unit.
or:
RADIO button on the remote control.
(radio mode, see page 4).

First installation wizard

First installation after switching on for the first time
This wizard starts automatically after the set is switched on for the first
time, however it can also be called later manually in the TV index, see
Repeat initial installation on page 14.
First installation wizard
Which language do you want to use for operation?
Initial installation
Language
Sprache D
Language GB
Langue F
Lingua I
Idioma E
Taal NL
Jazyk CZ
Γλώσσα GR
Język PL
Nyelv H
Proceed
OK
The first step with the wizard starts when selecting the
language for the user prompts. From this point on follow
the instructions on your TV set.
Brief explanation of button functions:
Press the ring (up, down, left, right) to move the cursor
and to select settings.
By pressing the OK button a setting is confirmed and you
will go to the next step.
You can select or remove several items with the yellow
button (see example below).
When an element is selected, it is marked by a
checkmark .
Use this button to go back one step.
Exit the wizard with the END button (if available).
Initial installation
Connect antenna cable(s)
Antenna cable(s) for:
Antenna/cable (analogue)
DVB-T
DVB-C
DVB-S (cable 1)
DVB-S (cable 2)
Proceed
OK
An example of multiple selection using the yellow button.
Kieli SF
Jezik SLO
OK
Jazyk SK
Lisan TR
Språk S
Sprog DK
Idioma P
Язык RUS
Språk N
to antenna socket(s):
ANT TV 
ANT TV 
ANT TV
ANT SAT 
ANT SAT2
Connect/disconnect
Back
Ž
continued on the next page
11 -