Table of Contents
Advertisement
Daily operation
Adjusting the sound
Switching sound off/on
Sound off;
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– volume louder / quieter.
The volume bar will be shown briefly if no other menu
is displayed.
Setting the sound mode
Call Sound mode.
Sound mode
optimal
3 4 S elect the number of speakers you want to hear.
Additional sound settings for volume adjustment and for Sound mode:
➠ As long as you can still see the volume bar or the
selection of speakers for sound mode:
Call additional sound settings.
Volume
24
3 4 S elect sound setting,
6 Go to the menu line below.
3 4 M ake changes.
Sound settings via the TV menu
➠ In normal TV mode, without other displays.
Call TV menu.
34 S elect Sound,
6 go to the menu line below.
3 4 S elect desired sound setting,
6 Go to the menu line below.
3 4 M ake changes.
- 18
...
(5)
4
3
2
1
Sound mode
DPLII mode
Sound adjustment
Explanations of the sound settings:
Sound mode
Select the number of speakers you want to hear. The
selection depends on the connected sound components
(from page 9) and on the transmitted audio signal.
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the existing
speakers (virtual).
optimal
The momentarily reproduced audio signal is output with
the ideal number of speakers.
1
Play centre sound or mono (left/right).
2
Play front sound (L/R stereo).
3
Play front and centre sound.
4
Play front and surround sound.
5
Play front, surround and centre sound.
➠ You can also enter the number of speakers with the
numeric buttons of the remote control.
Amplifier
play via an external HiFi amplifier. Selection is only
possible if an amplifier has been selected in the sound
components wizard.
Sound
Speech, Classical, Pop, Custom music, and Custom film
adjustment
sound.
Headphone vol.
Adjust the headphones volume.
Loudness
Proper boost of bass and treble tones at low volume.
DPLII mode
Here you can make Dolby Pro Logic II sound settings for
movie, music, matrix and personal settings. Menu item
only appears when more than speakers are selected in
the sound mode.
END
Headphone volume
more ...
call with OK.
Sound
Selection possibility Mono/Stereo or Sound 1 or Sound
Speakers/
for two-sound broadcasts separately for speakers and
Headphones
headphones. Only available for analogue stations.
Auto Volume
Reduces volume differences, e.g. for advertisements that
are too loud.
AV output
Sound selection for two-sound broadcasts.
signal
Maximum
Determining the maximum volume that can be set.
volume
Switch on
Specify the volume that is set when switching on the TV
volume
set with the mains switch. This does not affect switching
the set on from standby mode.
Volume
The volume can differ according to the individual stations.
adjustment for
If the sound is too loud or too quiet in relation to other
current station
stations, adjust the volume. When the menu is open, you
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Hide quick links:
Advertisement
Table of Contents
