Related Manuals for Loewe 46, 40
Summary of Contents for Loewe 46, 40
-
Page 1: Operating Instructions
Operating Instructions Individual 46 Compose Full-HD Individual 40 Compose Full-HD... -
Page 2: Table Of Contents
Connecting devices to the Component IN connection and playback ...38 Sound components wizard ...39 TV speakers ...39 Speaker system Loewe Individual Sound on the Dolby Digital Decoder of the TV set ...40 Connecting other speaker systems or active speakers to the Dolby Digital Decoder ...41... -
Page 3: Remote Control – Tv Functions
Remote Control – TV Functions (Page 18) ..Sound off/on (Page 50) ..LED display for current operating mode (Page 10; page 50) ... Switch over to TV mode (Page 50) ..Switch over to operate recorder (Page 47) ..Timer overview on/off (Page 0) ..Set picture format (Page 0) ..Assist+ menu on/off (Page 8) ..Electronic Programme Guide on/off (Page 0) ..Teletext on/off (Page 1) ..Menu on/off (Page 18) ..V+/V– volume louder/quieter (Page 7) . -
Page 4: Control Unit Front Side Of The Device
Control unit front side of the device The mains switch is on the bottom of the TV On/Off button: Switch on from the standby mode Switch off from the standby mode Button – : Station down in the menu: to the left Button R: Radio on/off (back to TV mode). -
Page 5: Connections Rear Side Of The Device
Connections rear side of the device Common Interface 1 (CI-Slot 1) Common Interface 2 (CI-Slot 2) USB connection (USB stick/card reader) Headphones connection S-VHS connection (AVS) (e.g. for camcorder) Video in (AVS) Audio in right (AVS) Audio in left (AVS) AUDIO OUT L/R - audio output left right (analogue) ANT SAT ANT2... -
Page 6: Welcome
Welcome Thank you! At Loewe, we combine the highest standards of technology, design and user friendliness. This applies equally for TV, video and accessories. Your new TV set is equipped for the TV standard "HDTV" (High Definition Television). With its high resolution screen and future-safe digital interfaces HDMI (High Definition Multimedia Interface), it offers the possibility of present- ® ing HDTV programmes in outstanding picture quality. HDTV is a worldwide, digital standard in the 16:9 format ® which revolutionises normal TV viewing. It is broadcast with an up to five times greater resolution than conven- ® tional signals and therefore creates an unexpectedly D image. The TV set is equipped for digital reception. You can use the already frequently broadcast "everywhere television" (DVB-T) as well as digital cable (DVB-C) and digital satellite reception (DVB-S). The Loewe Digital HD platform even allows dual reception of DVB-T, DVB-C and DVB-S. The TV set is equipped with a Dolby Digital Decoder. You can connect a speaker system (e.g. Loewe Individual Sound) or active speakers and enjoy movie theater sound. You can connect a card reader or a USB stick with digital photos to your new TV set's USB connection and view your photos via the integrated PhotoViewer software. -
Page 7: Operating Convenience With Wizards
Welcome Operating convenience with wizards This TV set offers user prompting with wizards that take you through the settings step-by-step. You can return to the previous step or exit the wizard at any time. The wizards in overview Initial installation The initial installation wizard helps you with the initial installation and connection of any existing equipment (see page 11). Setting up the antenna You enter in the antenna wizard which antenna signals are available to you. The antenna wizard is called in initial installation (see page 11). You can also call the antenna wizard in the TV menu under Connections → Antenna DVB → Antenna DVB-S or Antenna DVB-T. Search wizard If you want to search for new stations after the initial installation, or if you have set up your antenna for the first time, then you can handle this task with the help of the search wizard (see page ). Connecting external devices The connection wizard ensures that all devices are correctly registered and connected. It is started automatically at the end of the initial instal- lation wizard but can also be called separately (see page 5). Connecting sound components The sound component wizard ensures that the components which re- produce the TV sound are correctly registered, connected and set. It is started automatically at the end of the initial installation wizard but can also be called separately (see page 9). -
Page 8: For Your Safety
For your safety For your own safety and to prevent unnecessary damage to your device, read and comply with the following safety instructions: Proper use and environmental conditions This TV set is designed exclusively for reception and reproduction of video and audio signals and is designed for living rooms or office facilities, and should not be operated in rooms with high humidity, such as a bathroom, or sauna, or where there is a high concentration of dust (e.g. -
Page 9: Environmental Protection
For your safety Repairs and accessories Never remove the back of the TV set yourself. Only have your TV device repaired or serviced by authorised television technicians. Only use original accessories such as Loewe stands if possible (see Ac- cessories on page 55). Supervision Do not allow children to use the TV set without supervision or to play in the immediate vicinity of the TV set. The set could tip over, be pushed off or pulled down from the stand surface and injure someone. Do not allow the switched-on TV set to run unattended. Volume Loud music can lead to ear damage. Avoid extreme volume especially over long periods and when using headphones. Cleaning Clean the TV set, the screen, and the remote control unit with a soft, moist, and clean cloth,only, without any aggressive or scouring cleaning agents. Thunder storms Pull out the mains plug and all connected antenna cables from the TV set in a thunderstorm. Overvoltage caused by lightning can damage the set via the antenna system, as well as via the mains. The mains plug and all connected antenna cables should also be pulled out during long pe- riods of absence. Note on the LCD screen The TV set you have purchased with LCD screen satisfies the most rigor- ous quality requirements and has been inspected relative to pixel errors. -
Page 10: Initial Installation
Inserting or replacing batteries Press the embossed arrow and push down the battery compartment cover. Insert two alkaline manganese LR 0 (AAA) batteries; ensure that the + and – poles are correctly positioned! Slide the cover up from below. Adjusting the remote control for operating the TV set Press the TV button. See page 50 to learn about operating other Loewe devices. - 10 Connecting the TV set Connecting to the mains ➠ Note the position of the mains connection in Individual Compose 40 / 46. Remove the cover for the connections. -
Page 11: Turning The Set On/Off
Initial installation Turning the set on/off Switching the TV set to standby mode Activate the mains switch on the bottom left of the set. The display in the control panel on the front of the set will be illuminated red, the set is now in standby mode. Switching the TV on/off on the control unit Press the on/off button in the middle for about seconds to switch the TV set on/off. Display Meaning of the display colour: Red: Standby mode Green: TV set is switched on Orange: R adio mode, TV set receives EPG data or timer recording active Switching the set on with the remote control Press the on/off button. - Page 12 Initial installation Explanations of the setting possibilities: Location Select the country for country-specific pre-settings. of TV set Antenna/cable (analogue): analogue stations via Antenna selection cable/antenna DVB-T: digital, terrestrial stations DVB-C: digital stations via cable DVB-S (line 1): digital stations via satellite DVB-S (line 2): digital stations via satellite DVB-T: If you are using an active antenna, then select yes (5V) Antenna for the antenna power supply. DVB-C: The conventional settings will be derived from the selec- Settings tion of set location. Only change this if you know other symbol rates and modulation types or if you have to spe- cify the network ID for your cable network (information available from your cable network provider). If you want to run the station search independently of the channel grid, select frequency search for the search method.
-
Page 13: Positioning/Aligning Dvb-T Antenna
Initial installation Positioning/aligning DVB-T antenna If you are receiving one or more DVB-T stations with picture and sound interference then you should change the installation location and align- ment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region. ➠ In normal TV mode, without other displays. A DVB-T station is received and selected. Call TV menu. 3 4 S elect Settings, 6 go to the menu line below. 3 4 S elect Stations, 6 go to the menu line below. 3 4 S elect Manual adjustment, OK call manual adjustment. Signal source Select the area in which you want the broadcaster to search here. You can use the button to automatically select station by station. -
Page 14: The Info Display
Operating convenience The info display The info display shows a content-based info text for each menu item at the top edge of the screen to help you in making the settings. In conjunc- tion with the index it creates a convenient control system. ➠ A menu is displayed. The factory setting makes the info display appear auto- matically for each menu item. In this case you can temporarily hide the info texts with the INFO button. The automatic info display can be hidden via a menu setting. Then it can be displayed once by pressing the INFO button. Settings Here, you can search for the stations automatically or manually as well as set the menu language, timer functions, parental lock, on-screen displays, etc. -
Page 15: Tv Menu – Overview Diagram
Operating convenience TV menu – Overview diagram Picture Picture adjustment Sound mode Contrast DPLII mode Colour intensity Sound adjustment Colour temperature Headphone volume Brightness Loudness Sharpness more... Digital Noise Control (DNC) more... Image+ Picture format Move picture up/down Auto format Film quality improvement (DMM) Radio menu –... -
Page 16: Daily Operation
Daily operation Select station With the keys P+ and P– on the remote control P+/P– station up/down. The station display with sound identification is displayed briefly. ➠ If favourites are selected, the station is switched over in the favourites list with P+/P– (see page 17). ➠ The symbols for the sound identification are described on page 1. ➠ If there are additional languages or DVB subtitles for DVB stations, then language and subtitle selection is shown below the station display. See also page 1: Additional selection possibilities for DVB stations. -
Page 17: Select Video Source
Daily operation With the favourites lists You can save and call your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list are already stored in the first list. Change the favourites list to suit your requirements (see Put together – changing favourites lists on page 4). ➠ In normal TV mode, without other displays: OK calls the station list. Red button: calls the favourites list. Favourites Favourites 1 1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS 5 hr-fernsehen ... -
Page 18: Adjusting The Sound
Daily operation Adjusting the sound Switching sound off/on Sound off; Sound on: Press button again or set volume V+. Setting the volume V+/V– volume louder / quieter. The volume bar will be shown briefly if no other menu is displayed. Setting the sound mode Call Sound mode. Sound mode optimal (5) 3 4 S elect the number of speakers you want to hear. Additional sound settings for volume adjustment and for Sound mode: ➠ As long as you can still see the volume bar or the selection of speakers for sound mode: Call additional sound settings. -
Page 19: Adjusting The Picture
Picture Here you can adjust among other things: Contrast, colour, brightness, picture Daily operation adjustment, sharpness, picture format. Adjusting the picture Picture adjustment Here, you can switch between the preset standard values for contrast, colour intensity, colour temperature, brightness, focus and digital noise reduction Call TV menu. -
Page 20: Button Functions
Daily operation Button functions Each operating mode of the TV set (TV, Radio, Teletext, EPG, or Picture in Picture) has a separate menu and separate functions for the coloured buttons. The assignment of the coloured buttons is illustrated in the description of the individual operating modes. Below, some of the button functions are listed which you need for daily operation of your TV set. Functions of the coloured buttons in TV mode Red button: Digital Recorder: DR archive on/off. Green button: Call menu Teletext subtitles. Teletext subtitles with normal size 3 4 S elect size of the Teletext subtitles, OK show Teletext subtitles. - Page 21 Daily operation Status display ➠ In normal TV mode, without other displays: END: Show / hide status display. Das Erste 14:30 - 15:15 Toskana Language-/sound selection 14:42 Alarm time 20:00 In the top two lines you will see the number and name of the station, the title of the programme currently running (if available) and the sound identification. The time and, if activated, the alarm time and switch-off time are displayed at the bottom. Explanations of the symbols for sound identification: Transmitted audio signal: Mono Mono audio transmission analogue 2-sound Two-sound transmission (Sound1/Sound) analogue Stereo Stereo sound transmission analogue or digital (PCM) Digital Dolby Digital sound transmission (DD) dts sound transmission...
-
Page 22: Managing Stations
Managing stations TV stations Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, except that the radio menu is called in radio mode (see also page 4). ➠ Station management is not possible if a programmed timer record- ing is still pending. Search/update stations – Search wizard In the search/update with the search wizard, new stations are searched for which are not yet stored. ➠ You have to repeat the initial installation (see page 11) and automatically search for new ones if you want to delete all the existing stations and automatically search for new ones. Call TV menu. 3 4 S elect Settings, 6 go to the menu line below. 3 4 S elect Stations, 6 go to the menu line below. 3 4 S elect Search wizard, 6 go to the menu line below. In the upper info text the current search settings will now be displayed: Search wizard Your TV carries out the update of the station range (search for new stations;... - Page 23 Managing stations Search/update station – manual search Call TV menu. 3 4 S elect Settings, 6 go to the menu line below. 3 4 S elect Stations, 6 go to the menu line below. 3 4 S elect Manual adjustment, Signal source Select the area in which you want the broadcaster to search here. You can OK call input box.
-
Page 24: Put Together – Change Favourites Lists
Managing stations Rename station ➠ DVB stations for which the station name is also broad- cast cannot be renamed. In this case, the Rename function is hidden. Blue button: Activates Rename station. Under the 1st letter of the name you will see a line indi- cating the current input position. 4 Input position right (also for spaces). 3 Input position left deletes the preceding character. Enter the letters one after another with the numeric buttons on the remote control. Like using a mobile phone keypad, press a numeric button until the desired charac- ter appears. The available letters are printed respectively on the buttons. Different special characters can be selected with button 1. Green button: Switch upper/lower case letters. OK to save new name. Restore stations Stations which have been deleted from the station list can be restored. - Page 25 Managing stations Add station to favourites list 3 Go to the left column (all stations). P+/P– Scroll in the pages of the station list if necessary. 6 Mark station or select station with the numeric buttons ( for alphabetical station sorting enter the initial letter ) which is to be transferred as a favourite to the favourites list. OK t ransfers the station to the favourites list. The new station is inserted at the end of the favourites list. Select/change favourites All stations 21 EinsPlus 22 ZDFinfokanal 23 ZDFdokukanal 24 ZDFtheaterkan 25 MDR FERNSEH 26 rbb Berlin 27 rbb Brandenburg ...
-
Page 26: Picture In Picture (Pip)
Picture in Picture Picture in Picture (PIP) The concurrent display of two different images is referred to as Picture in Picture. ➠ A concurrent representation of two HDTV signals is not possible. ➠ A concurrent representation of two coded stations is not possible. ➠ Picture change and station selection is restricted during recording. Your TV set differentiates two PIP types: Split Screen In this case the screen is divided in the middle and the additonal PIP image is shown on the right side of the screen. Both images are compressed horizontally and each gets half of the screen. -
Page 27: Configure Picture In Picture (Pip) Mode
Picture in Picture Configure Picture in Picture (PIP) mode In the PIP menu, you can set the PIP type (split screen or small PIP) and the position of the small picture. Start PIP menu ➠ PIP mode started, if not, press PIP button. ➠ The frame is green, if not, press the green button. Call the PIP menu. TV menu Settings Type Small PIP Split screen Switch over to small picture ➠ PIP menu open. TV menu Settings Type Small PIP... -
Page 28: Electronic Programme Guide
Electronic Programme Guide Electronic Programme Guide – EPG EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed pro- gramme guide, you can learn about the current programme. In addition programmes can be sorted according to certain topics, memorised, and also recordings can be programmed. Starting and ending EPG Switching EPG on / off EPG (Electronic Programme Guide) Date Mon 31.07 Time Station Topics 15:57-16:59 arte 16:00-16:15 MDR FERN... 16:00-16:10 EinsExtra 16:00-17:15 SAT.1 16:00-16:30 ProSieben... -
Page 29: Configuring Epg
Electronic Programme Guide Calling additional information about the programmes ➠ Brief information about many programmes is displayed below the programme list of the broadcasts. You can call detailed information with the TEXT button if this function is offered by the TEXT icon in the lower left. Programming a recording for a recorder ➠ Selection is in the lower programme list, if not, press the blue button. 6 M ark the desired programme. Red button: Starts recording wizard. -
Page 30: Teletext
Teletext Teletext Your TV set supports the two operating systems TOP Text and FLOF. Up to ,000 pages are stored so that you have quick access. Starting and ending Teletext Switching Teletext on / off. ARDtext ARD Text Politik: Die neuen Gesetzesentwürfe ... . Wird auch der Nahverkehr teurer? ....Australien: Keine Zugeständnisse . -
Page 31: Teletext Menu
Teletext Programming timer recordings via Teletext ➠ Teletext is started, if not, press the TEXT button. Call the programme pages of the current station. Change preset page numbers, see this page. Green button: Go to the appropriate page. 6 S elect the desired programme, OK to programme the recording. Change the appropriate recording data in the following menu Timer data if necessary (see also page 46, the direct recording path). OK to confirm. Teletext menu In the Teletext menu you can, among other things, activate news, reveal pages and configure the teletext with the Settings menu function. Starting the Teletext menu ➠ Teletext is started, if not, press the TEXT button. Call the Teletext menu. -
Page 32: Conditional Access Module (Ca Module)
Conditional Access Module (CA module) In order to receive coded digital stations, a Conditional Access Module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see page 5). The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer. Inserting the Smart Card into the CA module Push the Smart Card into the CA module as far as it goes so that the side with the gold coloured contact chip is facing the side of the CA module marked with the provider's logo. Note the direction of the arrow printed on the Smart Card. Inserting the CA module in the CI slot ➠ Switch off the TV set's mains switch. Remove the cover from the rear of the set. Ejector button Carefully insert the CA module in CI slot 1 or CI slot with the contact side forward. If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process. If the CA module is correctly installed, the ejector button protrudes a little further. -
Page 33: Software Update
Software update TV base software and DVB software To ensure that your TV set is always up to date from time to time Loewe will make updated TV base software and DVB software versions available. These updates are broadcast via satellite (at present only via ASTRA1), or they can be installed on your set via a USB stick. Please contact your dealer for a software update via USB stick. Automatic search for new software via satellite The set automatically determines whether a new software version is available per satellite during the night when the EPG data are updated. However the TV set must remain in standby mode for this (do not switch off the set with the mains switch). If a new software version has been found, the set informs you with an on-screen message the next time it is switched on (see right column – Loading new software). -
Page 34: Radio
Radio Radio mode You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs. Radio mode on/off Radio mode on: RADIO button on the remote control. or: R on the TV set operating ring. Radio: 102 BAYERN 1 AUDIO DIGIT... AUDIO IN2 AUDIO IN1 HDMI2/DVI HDMI1/DVI DVD-REC 101 B5 AKTL 102 BAYERN 1 103 BR4 KLSK ... -
Page 35: Operating Additional Equipment
Operating additional equipment Device connection wizard Connecting additional devices to the TV set The device connection wizard serves to connect new devices to the TV set or make wiring changes. ➠ New devices should not be connected until they have been registered in the connection wizard. Call TV menu. 3 4 S elect Connections, 6 go to the menu line below. 3 4 S elect New devices/modifications. OK calls the wizard. END: It is possible to run the wizard only partially at any time. You have to confirm changes on a page with OK. Connection wizard Connect the satellite dishes or cable/terrestrial antennas of your AV equipment (recorder, decoder, ...) to the TV set according to the enclosed operating manual. - Page 36 Operating additional equipment Explanations of important settings Signal type The signal type of the devices that can be connected can vary greatly. If you are not sure, leave the setting for Signal on Automamtic CVBS/YC (e.g. for DVD Player/Recorder) or Autom.-VHS/SVHS (e.g. video recorder), otherwise select the right signal type. See the glossary on page 56 for further information. Immediate If the picture from a connected device is to be displayed playback immediately on the TV set during playback, select yes. A switching voltage is allowed so that you do not have to switch over manually to see the picture of the connected device. (See the operating manual of the connected re- production device.) When playing from Digital Link Plus devices, the picture is always displayed immediately, regardless of the setting. Assign digital Select the AV socket to which the device of which you audio input want to hear the digital sound is connected. Connect the digital output of the external device to the digital input of the TV set (see page 45). If a device with digital audio is not connected then select no.
-
Page 37: Connecting Devices To The Hdmi (Dvi) Connections And Playback
Operating additional equipment Connecting devices to the HDMI (DVI) connections and playback The HDMI connections (High Definition Multimedia In- terface) permit digital video and audio transmission via a connection cable from a player, e.g. from the Loewe Centros 10/17 HD DVD recorder. The digital picture and sound data are transmitted without data compres- sion and therefore lose none of their quality. Analogue/digital conversion is no longer necessary in the connected devices, which also would result in quality losses. Using a DVI/HDMI adapter cable, the digital video signals of a DVI player can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI and DVI both use the same copy protection method HDCP. Connecting the device Call TV menu. 34 S elect Connections, 6 go to the menu line below. 34 S elect New devices/modifications. OK calls the wizard. -
Page 38: Connecting Devices To The Component In Connection And Playback
Operating additional equipment Connecting the audio signal from the PC or from the SetTopBox Analogue audio signal: Connect the analogue audio signal from the PC or the SetTopBox via stereo cable to the AUDIO IN2 jack on the TV set. The sound is played via the speakers connected to the TV set or a speaker system. Digital audio signal: ➠ An external digital audio signal can be reproduced via the integrated Dolby Digital Decoder or via an externally connected digital audio amplifier. Connect the digital audio signal from the PC or the SetTop-Box via a simple cinch cable to the AUDIO DIGITAL IN socket on the TV set. -
Page 39: Sound Components Wizard
TV set. DVDs or CDs with PCM coded audio format are also decoded by the Dolby Digital Decoder. The CD/DVD player must be connected via a coaxial, digital connection to the digital input AUDIO DIGITAL IN for this (see page 45). The audio signals decoded by the Dolby Digital Decoder are output via the AUDIO LINK interface. You can connect a speaker system such as the Loewe "Individual Sound" (see page 40) or active speakers (see page 41) to the AUDIO LINK interface and configure these with the sound components wizard. Settings for speaker systems and active speakers which are connected via the AUDIO LINK interface to the Dolby Digital Decoder of the TV set: • Register speaker (system) or active speaker. •... -
Page 40: Speaker System Loewe Individual Sound On The Dolby Digital Decoder Of The Tv Set
Operating additional equipment Speaker system Loewe Individual Sound on the Dolby Digital Decoder of the TV set Setup The arrangement of speakers and TV set can look like the illustration below: The front and surround speakers should be installed symmetrically to the TV set and to your sitting position. You can place the subwoofer anywhere on the floor. We recommend placing it in front asymmetrically next to the TV set. If a centre speaker is used, it should be placed centrally below the TV set. For the settings in the sound components wizard enter the distances of the centre speaker, and the front and surround speakers to your sitting position. This guarantees a natural spatial image of the sound. -
Page 41: Connecting Other Speaker Systems Or Active Speakers To The Dolby Digital Decoder
Operating additional equipment Connecting other speaker systems or active speakers to the Dolby Digital Decoder If you want to use another similar speaker system or active speakers, you can connect these to the AUDIO LINK interface of the TV set with an adapter cable. The adapter cable is available from your dealer (see Accessories, page 55). Connecting Before connecting any devices ensure that they are switched off or unplug their mains plug. Plug the adapter cable into the AUDIO LINK interface of the TV set. Con- nect the cinch connections of the adapter cable to the connections of the corresponding active speakers. The cinch connections of the adapter cable are labelled: R for front right L for front left C for centre SR for surround right... - Page 42 Operating additional equipment If you want to set new sound components or change them: 3 4 S elect Configuration/modification, OK calls the selection, whether complete, partial or new set-up. Sound components wizard Please specify here whether you want to completely reconfigure a speakers system or whether you want to limit the configuration to changing the speaker connections, the speaker distances from the listening position or the individual speaker levels in relation to each other.
- Page 43 Operating additional equipment OK continue to set the Distance from the left front speaker. ➠ Measure the distances from your sitting position to the front, surround, and centre speakers respectively. The Dolby Digital Decoder calculates the delay times for the speaker signals from these so that they reach the listen- er simultaneously. Sound components wizard Please enter the distance of the left front speaker from your listening position here. Sound components Distance to left front speaker 4,2 m Proceed 34 S et the distance between the left front speaker...
-
Page 44: Connecting Audio Amplifiers
Operating additional equipment Connecting audio amplifiers The sound components wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual of the audio amplifier for more information. Call TV menu. 34 S elect Connections, 6 go to the menu line below. 3 4 S elect Sound components. OK calls the sound components wizard 6 M ark the HiFi/AV amplifier. Sound components Sound playback via ... TV speakers Speakers system HiFi/AV amplifier HiFi/AV amplifier or TV speakers (switchable) Proceed OK to continue. -
Page 45: Assignment Of The Digital Audio Input
Operating additional equipment Assignment of the digital audio input Your TV set can assign an AV input to the digital audio input socket AU- DIO DIGITAL IN. When switching over to this AV input, the digital audio signal at the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will hear the digital sound of the assigned AV input, if available, in place of the analogue sound. Connecting devices to the digital audio input You must feed the digital audio signal to the TV set for sound reproduc- tion from an external device, e.g. from the DVD player. Reproduction of the external digital audio signal can be played back via the Dolby Digital Decoder integrated in the TV set or via an externally connected digital audio amplifier. ➠ If an external audio amplifier is used, this must be regis- tered in the sound components wizard (see page 44). Call TV menu. 34 S elect Connections, 6 go to the menu line below. -
Page 46: The Direct Way To Record
Operating additional equipment The direct way to record You can programme timer recordings via the integrated Digital Recorder or connected recorders on the TV set. The recording wizard is integrated at several places for programming a recording. Further information about recording with the Digital Recorder can be found in a separate operating manual. Programming a timer recording with the EPG ➠ You are in EPG mode,if not, press the EPG button. EPG (Electronic Programme Guide) Date Mon 31.07 Time Station Topics 15:57-16:59 arte 16:00-16:15 MDR FERN... -
Page 47: Timer Recording With External Devices
Digital stations If you want to record digital stations with an externally connected recorder, then the DVB tuner is used and the TV device takes over control of the recorder. Then the station on the TV set is locked during the timer recording. It is not possible to switch over to INFO Manual another DVB station. Recorder without Digital Link Plus If you cannot programme your externally connected Loewe recorder from the TV set, but it supports Digital Link (Loewe-own system), the receiver of the TV set is always used. Digital Link must be switched on on the recorder. Read the operating instructions of your Loewe recorder. In addition use only Euro AV cables for the connection between TV set and recorder. Analogue and digital stations You can control the recording from the TV set. The recorder must be set manually to the AV input, to which the TV device is connect- ed. Then the station on the TV set is locked during the timer recording. It is not possible to switch over to another DVB... -
Page 48: Photoviewer
Operating additional equipment PhotoViewer You can view photos in the standard JPEG format stored on a USB stick or a memory card in a card reader. You can also collect photos in a slide show. Connecting Plug a card reader (with a USB cable) or a USB stick into the USB con- nection on the TV set (see page 5). If, due to the selected installation solution of the TV set (e.g. for wall as- sembly), the USB socket is difficult to access, use a USB extension cable for the USB stick (available from your dealer). To mount the cover, break out the cable opening in the cover flap. Starting the PhotoViewer ➠ No photos can be shown which are available in progressive JPEG format. A memory card or the USB stick should contain data in standard JPEG format with the file extension ".jpg". PhotoViewer mode starts automatically when a memory card is inserted in the card reader, or when a USB stick is inserted. You see the first page of the photo overview (see right column). If a memory medium is already connected, start the PhotoViewer as follows: Call the Assist+ menu. - Page 49 Operating additional equipment Open folder ➠ Folders will only be displayed if they were created on the memory card / USB stick. 634mark a folder in the photo overview. OK open folder. The photos in this folder are displayed. USB 1:\Folder _1\ Open folder Marking photos for slide show Mark the photos that you want to display in a slide show. 463Navigate to a photo. USB 1:\Folder_1\picture_017.jpg View picture Unmark picture Blue button: marks photo for slide show. Starting a slide show ➠ No photos marked: All photos of the folder that was just opened will be displayed. ➠ Photos marked: Only marked photos will be displayed. Play button: Start / continue slide show.
-
Page 50: Operating Loewe Equipment
Loewe Centros 110/117 Loewe Centros 10/10 HD/17 HD Loewe ViewVision DR+ Loewe ViewVision 8106 H Loewe Auro 16 PS/8116 DT Loewe Xemix 6 PS Functions for the Loewe DVD recorder (Centros 1202, 2102 HD, ViewVision DR+) TV Sound off/on Switch on/off - on stand by LED indicator for current operating mode short: TV Radio Digital; Switch over to operate TV set... -
Page 51: Rotating The Tv Set
Operating additional equipment Rotating the TV set Your TV set has a connection for a rotating stand control. If the set is mounted on a motorised stand, you can use the remote control to adjust it to your seating location accordingly. ➠ A motor unit is connected. ➠ In normal TV mode, without other displays. 34 R otate the TV set. Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement. -
Page 52: Troubleshooting
Troubleshooting Problem All menus are displayed in the wrong language. The menu language was set incorrectly. In the TV menu, Connections cannot be called (displayed in grey). The control functions of the Loewe Recorder and the Timer are not working or are not working properly General problems when connecting external devices via an AV input. The connection of a decoder does not function or does not function properly. - 5 Possible cause A timer recording is in progress. a) The Digital Link function is not activated or not possible in the recorder. b) EURO-AV cable is not connected. c) Recorder is not logged in. a) T he device is not logged in to the connection wizard or is connected differently from shown in the connection diagram. b) The AV standard is set incorrectly. c) The signal type is set incorrectly. a) The signal is not decoded because the correct decoder stations have not been selected in the connection wizard. - Page 53 Troubleshooting Problem Digital Link Plus does not work. With Teletext various character sets are displayed incorrectly. No sound via the external digital audio amplifier. The picture of an additional device can be seen but the timer cannot be called. The picture of an additional device can be seen, however the error message no recorder available is output. Photos on the USB stick are not displayed correctly in the PhotoViewer or a "?" appears. Possible cause a) EURO-AV cable is not fully wired (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. The wrong character set has been set in the Teletext menu. a) The external digital audio amplifier does not support the selected sound format (Dolby Digital, dts, MPEG). b) TV set and external digital audio amplifier are not connected with each other. The device is not registered in the connection wizard or is connected differently from shown in the connection diagram. The device is not registered in the connection wizard or is connected differently from shown in the connection diagram.
-
Page 54: Technical Data
Technical data General data Type Article number Device dimensions without base (W x H x D) in cm Weight (approximate) in kg Display Picture diagonal in cm/picture format Resolution in pixels Dynamic contrast ratio Static contrast ratio Viewing angle horizontal and vertical Power consumption (EN 6087) in operation (watt) in standby (watt) Ambient temperature (Celsius) Relative humidity (non-condensing) Air pressure Electrical data Chassis designation: ..L 700 Power supply: ...0 V – 40 V/50–60 Hz Tuner: ..VHF/UHF/cable/hyperband Range:... 45 MHz to 860 MHz Station storage locations incl. AV and radio: ..4000 TV standards: ... B/G, I, L, D/K, M, N Colour standard: ... SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz) Sound standard ...Mono/Stereo/-Ton/Nicam B/G, I, L ...Dolby Digital, Dolby Virtual Speaker, DTS Audio nominal power: . -
Page 55: Accessories
An external centre speaker is recommended for perfect spatial sound. It can be installed on a table stand or mounted on the wall. The Center- speaker I Compose can be combined with the Loewe Individual Sound System. Loewe Individual Sound: The Individual Compose can be perfectly supplemented with the Indi- vidual Sound speaker system. Numerous speaker combination possibili- ties with standard speakers, staellite speakers and a subwoofer can be implemented. Here as well it is possible to choose the colours of housing and trim. Loewe DVD recorder: The DVD recorders from Loewe are characterised by form and colour, which match Loewe TV sets, adapted user guidance and technology. Combined these devices form a system that offers many advantages. Cube i Rack: The Cube i Rack is designed as a supplemental rack that can accommo- date two peripheral devices such as DVD player and/or DVD recorder, as well as the subwoofer of the Loewe Individual Sound speaker system. If a subwoofer is not used then the Cube i Rack can accommodate up to four peripheral devices. Cable: AUDIO LINK adapter 1.5 m Loewe order no. 89954.001 AUDIO LINK 1.5 m... -
Page 56: Glossary
"Y" and the colour difference signals "Pb" and "Pr". YPbPr is the original analogue version of the digital YCbCr with which, among other things, video data stored on the DVD and transmitted by satellite, cable or an- tenna in DVB are colour coded. Conditional Access Module: See CA module. Decoder: Analogue, coded TV signals are passed through a decoder and made visible again. Digital Link: System for controlling recorders (for video and DVD recorders from Loewe) via the Euro AV sockets of the Loewe TV set with concealed setup. Controlling the recorder for timer recordings. Digital Link Plus: System for controlling recorders according to protocol 50. For analogue stations the station and timer data are transmitted via the EURO-AV socket to the recorder. The timer recording is executed exclusively by the recorder. There is a different designation with different manufacturers. Dolby Digital: Digital multi-channel audio. The digital standard for high quality home movie systems. The individual channels are broadcast sepa- rately in this standard. The three front channels right, left and centre, the two surround channels right and left and the external subwoofer channels are called a 5.1 signal. Another term for Dolby Digital is AC. - Page 57 (JPG for short) named after the committee is a widely used graphic format for photos. JPG: See JPEG. LCD: Liquid Crystal Display. L-Link: Intelligent system connection between Loewe devices for the automatic exchange of information. Makes the operation of TV and Loewe system components even more convenient. LNB/LNC: The crucial electronic component of a satellite antenna is referred to as an LNB (Low Noise Block Converter). It is mounted in the...
- Page 58 Glossary Signal input groups: The signal sources are divided into different groups depending on the applied signal. All signal input groups with their cor- responding signal types and the possible inputs are listed below. TV analogue: Signal type: FBAS, YC, RGB-SD (480i/576i), Component-SD (480i/576i) Input: Tuner analogue, AV1, AV, AVS, COMP. In TV digital: Signal type: DVB-SD, HDMI-SD (480i/576i) Input: Tuner digital, HDMI1/DVI, HDMI/DVI HD analogue: Signal type: RGB-HD (video mode: e.g.190x1080, 180x70), Component-HD (video modes: e.g. 190x1080, 180x70) Input: COMP. IN, PC IN HD digital: Signal type: DVB-HD, HDMI-HD Input: Tuner digital, HDMI1/DVI, HDMI/DVI PC: Signal type: RGB (PC modes: e.g. 800x600, 104x768, 180x104, 160x768) Input: PC IN PhotoViewer: Input: USB Signal strength: strength of the received antenna signal.
-
Page 59: Index
Index DVD button 50 DVI 37 Active speakers 41 Adjusting the picture 19 Adjusting the sound 18 EPG 28 Alarm 15 Assist+ 7, 20 Audio amplifiers 44 Factory settings picture/sound 19 Auto format 19 Favorites 17 AV audio signal 18 File folder 49 AV selection 17 First installation wizard 11... -
Page 60: Service
Tel. +34 - 917 48 29 60 Fax +61 - 3 - 94 29 08 33 Fax +34 - 913 29 16 75 Email mail@internationaldynamics.com.au Email loewe@maygap.com Loewe Opta Benelux NV/SA Loewe Opta France S.A. Uilenbaan 84 13 rue du Dépôt, 2160 Antwerpen, België...