7 – 8 Video mode Initial installation Operating additional equipment 18 – 20 Batteries – remote control Logging in and connecting Connection AV equipment Switching on Video playback Initial installation Loewe video recorders and direct operation of Loewe DVD players...
Remote control – TV functions Radio mode on/off Indicator: Operate VCR Control 150 Indicator: operate DVD Picture menu Direct operation Switch on/off select for VCR/DVD/TV – in standby mode ✳ PIP operation on/off Sound off/on (Mute) EPG operation on/off Video operation with video operating line on/off Select programme directly...
Control panels Connections on the right side of the TV set Aventos Audio input (white=left, red= right) – Video input AVS (CVBS) Channel up/down Video input AVS On/Off key Standby indicator /in a menu: adjust (Y/C, CVBS) Operating indicator To display menu Headphones socket Connections on the right side of the TV set Mimo...
✳ Antenna socket for picture-in-picture (PIP). STAND Insert antenna plug of your antenna or cable installation here. Connection for subwoofer in the stand, Connection for Loewe active loudspeaker systems special subwoofer Dolby digital module ✳ or Home Automation ✳ depending on equipment and...
For your own safety For your own safety and in order to avoid • Like every piece of electronic equipment, • Avoid dropping metal objects, needles, unnecessarily damaging your TV set, please your TV needs air for cooling. Obstructing paper clips, liquids, wax or similar into the read and observe the following safety the air supply to the set can cause fires.
TV. We recommend you to use only original • Lay the power cable so that it cannot be parts, e.g. Loewe racks and stands. When using turntables and drawer shelves, damaged. The power cable may not be...
If your TV is equipped with a picture-in-picture Finally log in your video recorders, decoders, tuner (PIP), plug the antenna plug protruding Loewe audio system and Home Automation from above the PIP antenna socket into the with the connection wizard and connect these antenna socket for the VHF/UHF tuner.
Daily handling Changing channels About the channel table Switching on/off Launch the channel table with Channels up/down (only favorite Your TV set is equipped with an eco-standby stations if these are shown in the power supply unit. The power consumption drops station table).
Daily handling Adjusting the picture General menu operation Adjusting the sound Call the Picture menu With the TV and picture menus, we show you how Adjusting the volume Call the TV menu to navigate within the menus. Which buttons you TV menu can use for operation is shown at the bottom of Adjust the volume...
Modes of operation ✳ Setting ”iPIP” Picture in Picture (PIP) Station scan Switch on PIP, call the PIP menu with the M The frame around the PIP Standard PIP functions: button. picture must be green. If it is In standard PIP, a PIP picture is displayed in the Mark not, press the green button.
Modes of operation updated accordingly. With the g h buttons, you Launching detailed information EPG mode mark a channel you want to watch (currently If detailed information about the selected chan- EPG is the electronic channel guide for TV pro- running), memorize or record.
Modes of operation EPG settings Select programmes for EPG If, for example, you cannot receive any EPG Select the channels here for which information is providers and no DVB is installed in the TV set, If you want to change the provider or want to to be collected.
Modes of operation More functions for page selection Displaying teletext pages Teletext mode Mark a specified page number on Stop self-turning pages (HOLD) Teletext transmits information such as News, the page (Page Catching) Weather, Sport, Programme Previews and Subti- tles. zoom: top half–...
● controlling Loewe VCRs via the Euro-AV cable. If 3. In a VCR with Digital Link Plus the VCR tuner the Loewe VCR only has Digital Link, the TV tuner Info Menu is used for the recording (not for satellite is used for recording.
Switch on the test channel on the VCR or insert button) Name VIDEO TV stand. DVD players, DVD recorder , Loewe audio a recorded tape and start playback. Col. st. Autom. When the channel is found: system, Pay-TV decoders, Loewe home...
Operating additional equipment Video playback Launch the AV channel via the AV selection In order to see the VCR picture on your TV and hear its sound you have several possibilities: Launch AV selection list 1. You can use the Euro-AV sockets on the TV set and on the VCR.
Page 20
You can switch over the remote control of the 20 seconds until the remote control automatically the VTR indicator on the remote TV set to operate Loewe video recorders and switches back to TV mode (none of the indicators control lights up ...
PIN in the TV menu - Set- information cannot be launched tings. Control of the Loewe VCR with the video con- a) The VCR’s Digital Link function is not activated a) Activate Digital Link in the VCR (see operating...
Page 22
The item ”Sound from...” in the Sound menu a) Change the setting to ”TV”. under ”Sound” is not set to ”TV” b) Either a dummy plug with bridges, Loewe b) Nothing is inserted in the 9-pole cube socket active loudspeaker system, the transmitter...
Item no. 61426 Loewe active loudspeaker systems Aventos 2 x 16 Watt / 4 Ohm Dimensions (cm) 85,5x62x59,5 (w x h x d) Mini-DIN 8-pole Service or Loewe audio systems Teletext HiText (Level 2.5) Weight (kg) ✳ Jack 3,5mm IR Link OUT...
Racks VGA connection upgrade kit for use with a Ask your dealer, he will be able to offer you the right rack from the Loewe range to suit your TV This transforms your TV set into a VGA monitor. set.