Panasonic KX-TVM50 Feature Manual page 91

Note
• If a telephone number has not been assigned to the selected device number, you cannot set
the device status. See "Assigning Notification Numbers" to assign a telephone number.
5.
Press [1] or [2] to select the message type.
•
•
6.
Press [1], [2], or [3] to select when the device will be used for message notification.
•
•
•
Assigning Notification Numbers
A maximum of 3 telephone or beeper numbers can be set for message notification. Use the number
keys 0 to 9, and the Beeper Callback Number Display Entry Code [X] to make these assignments.
When the Beeper Callback No. Entry Code is added at the end of a beeper number, the VPS will ask
the caller to enter the callback number that will be displayed on the beeper. System Programming
determines if the Callback Number Entry is to be entered before, after, or without the message.
It is also possible to have the caller select whether or not he or she wishes to enter a callback number.
The System Manager must authorise the use of the Beeper Callback No. Entry Code.
1.
Log in to the Main Menu.
2.
Press [2] to set Message Waiting Notification
3.
Press [3] to assign a telephone/beeper (pager) number.
4.
Press [1] to change the first telephone number, [2] to change the second telephone number, or
[3] to change the third telephone number.
5.
Press [1] to set the telephone number.
6.
Enter the telephone number.
7.
Press [2] to accept the entry.
•
[1] Notify of all messages
[2] Notify of urgent messages
[1] Schedule (notification is sent each time a message is received, but only during the
times programmed by the System Administrator)
[2] Continuously (notification is sent each time a message is received)
[3] Not Use (notification is never sent)
[1] Change the telephone number
3.2 Message Manager's Guide
Feature Manual 91