Atm Oam Cc Send - THOMSON ST780 WL Cli Reference Manual

ATM Commands

atm oam cc send

Send CC activate/deactivate to connection.
SYNTAX:
atm oam cc send
where:
port
vpi
vci
span
action
direction
RELATED COMMANDS:
atm oam cc list
atm oam cc modify
E-DOC-CTC-20061027-0012 v2.0
port = <{dsl0} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment | end2end}>]
[action = <{activate | deactivate}>]
[direction = <{source | sink | both}>]
The ATM port number.
Choose between:
>
DSL0.
Or specify a port number (dsl0 has port number 0).
A number between 0 and 15.
Represents the VPI.
A number between 0 and 511.
Represents the VCI.
Note For a VP cross-connection, use 0 or do not specify.
Select the CC span.
Choose between:
>
end2end: monitoring occurs on the entire VC between two ATM end
stations.
>
segment: monitoring occurs on a VC segment between the Thomson
ST and a first-hop ATM switch.
Activate or deactivate CC.
The default is deactivate.
Indicates the direction of CC activity.
Choose between:
>
source
>
sink
>
both.
The default is both.
Display Continuity Check (CC) configuration.
Modify CC on the connection.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
51