THOMSON ST780 WL Cli Reference Manual page 629

PPP Commands
metric
EXAMPLE:
=>ppp iflist
Internet: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
acname : ---
Rt_PPPoA: dest : RtPPPoA_atm
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
=>ppp rtadd intf=Rt_PPPoA dst=0.0.0.0/0 src=10.0.0.0/1
=>ppp iflist
Internet: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
acname : ---
Rt_PPPoA: dest : RtPPPoA_atm
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
ppp rtdelete
E-DOC-CTC-20061027-0012 v2.0
The route metric, in other words, the cost factor of the route.
Practically, the cost is determined by the hop count.
[00:00:00]
mru = 1492 Tx inactivity = 1200s
user = password =
oper state = down
retransm = 10
retransm = 0
service : ---
[00:00:00]
mru = 1500
user = johndoe@ISP password = ********
oper state = down
retransm = 10
retransm = 0
[00:00:00]
mru = 1492 Tx inactivity = 1200s
user = password =
oper state = down
retransm = 10
retransm = 0
service : ---
[00:00:00]
mru = 1500
user = johndoe@ISP password = ********
oper state = down
retransm = 10
retransm = 0
Delete the route for a PPP link.
left = 0s
link state = not-connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
left = 0s
link state = not-connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
OPTIONAL
603