Dhcp Client Ifconfig - THOMSON ST780 WL Cli Reference Manual

dhcp client ifconfig

Configure a DHCP client.
i
Use the command :dhcp client ifrelease before configuring the dhcp client.
SYNTAX:
dhcp client ifconfig
where:
intf
label
metric
dnsmetric
broadcast
serverroute
RELATED COMMANDS
label add
114
intf = <string>
[label = <label name>]
[metric = <number{0-255}>]
[dnsmetric = <number{0-100}>]
[broadcast = <{disabled|enabled}>]
[serverroute = <disabled|enabled>]
The name of the dynamic interface to be configured.
Label for default gateway and static routes.
A number between 0 and 255.
Represents the route metric for default gateway and static
routes.
The default is 1.
A number between 0 and 100.
Represents the DNS route metric.
The default is 1.
Operate client in unicast/broadcast mode.
The default is enabled.
Insert a route for the DHCP server IP.
The default is enabled.
Create a new label.
DHCP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0