THOMSON ST780 WL Cli Reference Manual page 601

NAT Commands
EXAMPLE:
=>nat maplist
Idx Type Interface
1 NAPT eth0
2 NAPT eth0
3 NAPT eth0
=>nat mapadd intf=myPPP_ppp type=napt outside_addr=100.100.100.1 access_list=10.0.0.0/24
=>nat maplist
Idx Type Interface
1 NAPT myPPP_ppp
1 NAPT eth0
2 NAPT eth0
3 NAPT eth0
=>maplist intf=myPPP_ppp expand=enabled
Idx Type Interface
1 NAPT myPPP_ppp
=>
RELATED COMMANDS:
nat mapdelete
nat maplist
E-DOC-CTC-20061027-0012 v2.0
Outside Address
any:80
any:1080
any:8080
Outside Address
100.100.100.1
any:80
any:1080
any:8080
Outside Address
100.100.100.1
Access List................... 10.0.0.0/24
Foreign Address............... any
Protocol...................... any
Flags......................... Static
Description................... Outbound NAPT without defserver
Delete an address mapping from a NAT enabled interface.
Display the address mapping for a NAT enabled interface.
Inside Address Use
127.0.0.1:8080 0
127.0.0.1:8080 0
127.0.0.1:8080 0
Inside Address Use
unmapped 0
127.0.0.1:8080 0
127.0.0.1:8080 0
127.0.0.1:8080 0
Inside Address Use
unmapped 0
575