THOMSON ST780 WL Cli Reference Manual page 129

CWMP Commands
maxEnvelopes
connectionRequest
connectionReqPath
connectionReqUserName
connectionReqPsswd
connectionReqAuth
qos-class
bootdelayrange
EXAMPLE:
=>cwmp config
State
Mode
Max Envelopes
Session Timeout
No Ip Timeout
Connection Request Port
Periodic Inform
Periodic Inform Interval
Connection Request
Connection Request UserName
Connection Request PassWord
Connection Request Path
Connection Request Authentication : enabled
Qos class
Boot delay range between 0 and
=>
E-DOC-CTC-20061027-0012 v2.0
Set the maximum number of SOAP envelopes sent
within one HTTP message.
The default is 2.
Set the connection request flag of the cwmp daemon.
Choose between:
>
enabled
>
disabled.
The default is enabled.
Set the path where the cwmp daemon can be reached.
Set the username the ACS must use to log in.
Set the password the ACS must use to log in.
Set the digest authentication flag of the cwmp
daemon.
Choose between:
>
enabled
>
disabled.
The default is enabled.
Set the quality of service class for outgoing CWMP
data.
The default is 12.
Set the delay on boot (in seconds) before inform is
sent.
The default is 0.
: disabled
: readonly
: 2
: 60
: 10
: 80
: enabled
: 20000 ms
: enabled
:
:
:
: 12
: 0s
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
103