THOMSON ST780 WL Cli Reference Manual page 409

GRP Commands
EXAMPLE:
=>grp rip show
RIP routing protocol config dump
------------------------------------
RIP daemon is enabled
Global RIP queries received : 0
Global RIP route changes : 0
Default version : send rip_v2, receive rip_v2
Default redistribution metric is 1
Sending routing table updates every 30 seconds with +/-5%
Route timeout after 180 seconds
Route garbage collect after 120 seconds
Import of connected routes is enabled
Import of kernel routes is enabled
Import of static routes is enabled
Import of default kernel route is enabled
Import of default static route is enabled
Export of RIP routes is enabled
Export of default RIP route is enabled
Transmission of default RIP route is enabled
Interface
BadRoutes
---------------------------------------------------------------------------------------------
-------------------
lan1
0
Internet
0
RIP routing table dump
--------------------------
Codes : K - Kernel, C - connected, S - Static, R - RIP, * - FIB route
Network
----------------------------------------------------------------------
C 10.0.0.0/24
C 192.168.1.0/24
=>
RELATED COMMANDS:
grp rip show
E-DOC-CTC-20061027-0012 v2.0
Send Recv
SentUpdates
rip_unspec rip_unspec
rip_unspec rip_unspec
Next Hop
Show the RIP settings and the routes in the RIP database.
AuthMode Passive
none enabled enabled
none enabled enabled
Metric From
1
1
SplitHorizon BadPackets
0 0
0 0
Flags
<> *
<> *
383