THOMSON ST780 WL Cli Reference Manual page 49

ATM Commands
ulp
EXAMPLE:
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
atm_8_35 : dest : atm_pvc_8_35
=>
=>atm ifconfig intf=atm_8_35 dest=atm_pvc_8_35 encaps=vcmux ulp=ppp
=>
=>atm iflist
atm_0_35 : dest : atm_pvc_0_35
atm_8_35 : dest : RtPPPoA
=>
E-DOC-CTC-20061027-0012 v2.0
Select the Upper Layer Protocol (ULP) for this interface.
Choose between:
>
ip (for a Routed IPoA interface).
>
mac (for a Bridged Ethernet, Routed ETHoA, Bridged PPP over
Ethernet (PPPoE), Routed PPPoE or a PPPoE Relay interface).
>
ppp (for a Routed PPP over ATM (PPPoA) interface).
The default is ip.
Retry : 10 QoS : default
Connection State : connected
Retry : 10 QoS : default
Connection State : not-connected
Retry : 10 QoS : default
Connection State : connected
Retry : 10 QoS : default
Connection State : not-connected
Encaps : llc Fcs : disabled Ulp : mac
Encaps : llc Fcs : disabled Ulp : mac
Encaps : llc Fcs : disabled Ulp : mac
Encaps : vcmux Fcs : disabled Ulp : ppp
OPTIONAL
23