Eth Bridge Dynvlan Add - THOMSON ST780 WL Cli Reference Manual

eth bridge dynvlan add

Add a dynamic VLAN membership entry.
SYNTAX:
eth bridge dynvlan add
where:
id
hwaddr
vlan
remvlan
RELATED COMMANDS:
eth bridge dynvlan actlist
eth bridge dynvlan config
eth bridge dynvlan delete
eth bridge dynvlan list
268
[id = <number{0-100000}>]
hwaddr = <masked-hardware-address>
vlan = <string>
[remvlan = <{default}>]
A number between 0 and 100000.
Represents the id of the dynamic VLAN membership entry.
The (masked) ethernet MAC address of the dynamic VLAN
membership entry.
The VLAN for the dynamic VLAN membership entry.
The VLAN that will be removed from the bridge interface.
Display the active MAC entries for the dynamic VLAN membership.
Modify the dynamic VLAN membership configuration.
Delete a dynamic VLAN membership entry.
Display a dynamic VLAN membership entry.
Eth Commands
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0