Table of Contents
Advertisement
2.
Remove the left speaker (2).
Reverse this procedure to install the left speaker.
Card reader board
Description
Card reader board
NOTE:
The card reader board spare part kit does not include the card reader board cable. The card
reader board cable is available using spare part number 818106-001.
Before removing the card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
b.
Fan (see
c.
RJ45 cover (see
d.
Security cable slot bracket (see
e.
System board (see
f.
Left speaker (see
Remove the card reader board:
Bottom cover on page
Battery on page
37)
Fan on page
46)
RJ45 cover on page
Security cable slot bracket on page
System board on page
Left speaker on page
27), and then remove the following components:
48)
51)
58)
Component replacement procedures
Spare part number
818122-001
50)
59
Advertisement
Table of Contents
