Table of Contents
Advertisement
1.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
black WLAN antenna cable connects to the WLAN module #2/Aux terminal.
NOTE:
discrete memory.
2.
Release the wireless antenna cables from the retention clip (2) built into the fan.
3.
Disconnect the display panel cable (3) from the system board.
4.
Remove the Phillips PM2.5×8.8 screw (1) that secures the left display hinge to the top cover.
5.
Release the left display hinge (2) by swinging it up and back.
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/
Step 2 applies only to computer models equipped with a graphics subystem with
Advertisement
Table of Contents
