HP ENVY 14-j000 Maintenance And Service Manual page 49

5. Remove the front speakers (see
6. Remove the battery (see
Remove the TouchPad board:
1. Disconnect the battery cable from the system board.
2. Release the fingerprint reader board cable (1) from the TouchPad board. (The fingerprint reader board
cable is secured to the TouchPad board with double-sided adhesive.)
3. Release the ZIF connector (2) to which the TouchPad board cable is attached, and then disconnect
the TouchPad board cable from the system board.
4. Remove the seven Phillips PM2.0×3.3 screws (3) that secure the TouchPad board to the top cover.
5. Remove the TouchPad board bracket (4).
Front speakers on page
Battery on page 37).
35).
Component replacement procedures 39