Table of Contents
Advertisement
6.
Remove the TouchPad board (5).
7.
If it is necessary to replace the TouchPad board cable, release the TouchPad board cable (1) from
the TouchPad board. (The TouchPad board cable is secured to the TouchPad board with double-
sided adhesive.)
8.
Release the ZIF connector (2) to which the TouchPad board cable is attached, and then disconnect
the TouchPad board cable (3) from the TouchPad board.
Reverse this procedure to install the TouchPad board.
40
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
