Table of Contents
Advertisement
10.
If it is necessary to replace the display hinges:
a.
Remove the display bezel.
b.
Remove the display panel.
c.
Remove the three Phillips PM2.5×2.3 broad head screws (1) that secure the display hinge cover to
the display back cover.
d.
Release the display hinge cover by twisting the top edge (2) of the display hinge cover up
and forward.
e.
Remove the display hinge cover (3).
The display hinge cover is available using spare part number 818120-001.
f.
Release the ground tape (1) that secures the display hinges to the display back cover.
g.
Remove the six Phillips PM2.5×2.2 broad head screws (2) that secure the display hinges to
the display back cover.
66
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
