Setting Up Vlan Ranges In A Profile - Alcatel-Lucent OmniSwitch 6450 Management Manual

Managing Switch User Accounts

Setting Up VLAN Ranges in a Profile

To set up VLAN ranges for a profile, enter the
profile name and the desired VLAN range. For example:
-> end-user profile Profile3 vlan-range 2-4 7-8
In this example, the VLAN range includes VLANs 2, 3, 4, 7, and 8. A user with this profile will be able to
manage these VLANs (depending on the command areas specified in the profile).
To remove a VLAN range from a profile, use the no form of the command and the VLAN ID of the start
of the range to be removed. For example:
-> end-user profile Profile3 no vlan-range 7
This command removes VLANs 7 and 8 from Profile3.
OmniSwitch 6250/6450 Switch Management Guide
end-user profile vlan-range
June 2013
Setting Up End-User Profiles
command with the relevant
page 9-35