Snmp Mib Information; Mib Tables; Mib Table Description - Alcatel-Lucent OmniSwitch 6450 Management Manual

SNMP MIB Information

SNMP MIB Information

MIB Tables

You can display MIB tables and their corresponding command families by using the
family command. The MIB table identifies the MIP identification number, the MIB table name and the
command family. If a command family is not valid for the entire MIB table, the command family is
displayed on a per-object basis.
For a list and description of system MIBs, refer to
prise (Proprietary) MIBs" on page
Switch Security" on page
The following is a partial display.
-> show snmp mib family
MIP ID MIB TABLE NAME
-------+----------------------------------------+---------------------
6145 esmConfTrap
6146 alcetherStatsTable
6147 dot3ControlTable
6148 dot3PauseTable
6149 dot3StatsTable
6150 esmConfTable
...
...
77828 healthModuleTable
77829 healthPortTable
77830 healthThreshInfo
...
...
87042 vacmContextTable
87043 vacmSecurityToGroupTable
87044 vacmAccessTable
87045 vacmViewTreeFamilyTable

MIB Table Description

If the user account has no restrictions, the display shown by the
very long. For documentation purposes, a partial list is shown above and three entry examples are defined.
• The first entry in the MIB Table shows an MIP identification number of 6145. The MIB table name is
esmConfTrap.This table is found in the AlcatelIND1Port MIB, which defines managed objects for the
ESM Driver subsystem.
• For MIP Id number 77828, the MIB table name is healthModuleTable. This table is found in the
AlcatelIND1Health MIB, which defines managed objects for the health monitoring subsystem.
• For MIB Id number 87042, the MIB table name is vacmContextTable. This table is found in the
SNMP-VIEW-BASED-ACM MIB, which serves as the view-based access control model (VACM) for
the SNMP.
page 3-16
"Industry Standard MIBs" on page 3-17
3-21. For a list and description of traps, refer to the
3-10.
OmniSwitch 6250/6450 Switch Management Guide
show snmp mib
"Using SNMP For
FAMILY
NO SNMP ACCESS
interface
interface
interface
interface
interface
rmon
rmon
rmon
snmp
snmp
snmp
snmp
show snmp mib family command can be
Using SNMP
and "Enter-
June 2013