Adjusting Tone And Brilliance; Plotter Displays - Furuno GP-1640F Operator's Manual

1.4 Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a
touch-and-release action. The tone and brill
window appears.
TONE
BRILL
Tone and display brilliance setting menu
Tone and brill window
2. Press ◄ or ► to adjust display tone.
3. Press ▲ or ▼ to adjust display brilliance.
Note that tone and brilliance can also be
adjusted by soft keys. After pressing the
[POWER/BRILL] key, use the appropriate soft
key to adjust tone or brilliance. Tone can be
adjusted by pressing the [POWER/BRILL] key
continuously.
Note: Tone or brilliance must be adjusted
within 10 seconds after pressing the
[POWER/BRILL] key or the tone and
brilliance adjustment screen will be
erased.
1.5

Plotter Displays

There are four types of plotter displays: Plotter
display, Navigation data display, Steering
display and Highway display. For details, refer
to Chapter 3.
Selecting display
Press the [PLOT] key. Each time this key is
pressed, the display mode changes in the
sequence shown below.
Functions
TONE
TONE
Soft keys
BRILL
BRILL
RETURN
WP-002
FISH
BRIDGE
GPS 3D
[Plotter Display]
DATE: MAY 23 2001 TIME 23:59:59
TRIP:123nm
POSITION
34° 56.789' N
135° 56.789' E
SPD RNG
16.3 27.2
kt nm
CSE BRG
245.8° 245.0°
DATUM: WGS-84
TMP 68.8°F DEP 20.8ft
GPS 3D
[Nav Data Display]
Q P < 0 1 >
230 240 250
2 4 5 . 0 °
2 7 . 2
BRG RNG
2 3 4 . 5 °
1 3 . 6
CSE SPD
TTG ETA
1h 59m 29th 14:50
0.1nm
XTE 000.02nm
GPS 3D
[Steering Display]
9 4 . 6 °
BRG
001WPT
RNG 1 . 8 8 n m
CSE SPD
1 0 . 0 k t
87.8°
001WPT
YUUKI
0.1nm
XTE 000.02nm
GPS 3D
[Highway Display]
Display modes (plotter)
NORTH
UP
ZOOM
IN
ZOOM
OUT
COURSE
UP
NAV
POS
LAT/LON
LAT
LON
TD
ZOOM
SAT
INFO
BEACON
INFO
CROSS
TRACK
260
n m
k t
0.1nm
EDIT
XT- LMT
HIGHWAY
FISH01
0.1nm
EDIT
XT-LMT
1-3