Connecting A Computer; Making A Presentation - Sony Ipela PCS-G60 Operating Instructions Manual

Connecting a Computer

Connecting cable with the
D-sub 15-pin connectors

Making a Presentation

To configure the presentation mode
When you transmit an RGB picture from a computer, etc. and a camera picture
simultaneously to a remote party, the remote party can view both pictures
simultaneously. This function is called "to make a presentation using the
presentation mode complying with H.239". Using this function allows smooth
reproduction of both camera and computer pictures. To make a presentation
using the presentation mode complying with H.239, it is necessary to turn on
the presentation mode on both the local and remote systems. If the presentation
mode on either of the systems is turned off, a presentation complying with
H.239 cannot be made.
To configure the presentation mode, set "H.239" to "On" on the IP: Mode page
(page 61) or on the ISDN: Mode page (page 62) of the Communication setup
menu.
To start a presentation
1
Press the TOOLS button on the Remote Commander to open the Tools
menu.
2
Press the b button on the Remote Commander and press the V, v, B or b
button to select "Execute" for "Presentation".
146
Using the Computer Picture for Presentation
TERMINAL VISCA OUT
CAMERA RGB IN RGB OUT
MIC(A1/A3)
1(R) 2(L)
R L R L
AUDIO OUT REC OUT
(PLUG IN POWER)
to RGB IN
(not supplied)
to RGB OUT
Computer
HDMI OUT ISDN UNIT AUX CONTROL
DC 19.5V