Sony Ipela PCS-G60 Operating Instructions Manual page 62

H.239 Ratio
When H.239 presentation transmissions are
made with the system, the H.239
presentation data shares bandwidth with
camera images that are also being sent. This
setting allows you to select how much of the
total bandwidth to use for H.239
presentation data transmissions.
2/3: Use 2/3 of the total bandwidth for H.239
presentation data transmissions.
1/2: Use 1/2 of the total bandwidth for H.239
presentation data transmissions.
1/3: Use 1/3 of the total bandwidth for H.239
presentation data transmissions.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can set this item for transmission and
reception, and point-to-point and multipoint
connections individually.
You can select from among 720, W4CIF,
W432P, WCIF, 4CIF, CIF, QCIF and
AUTO.
Note
When configuring transmission settings you
can only select from WCIF, 4CIF, CIF, QCIF,
or AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can set this item for transmission and
reception, and point-to-point and multipoint
connections individually.
You can select from among H.261, H.263+,
and H.264.
Video Frame
Allows you to select the number of video
frames during transmission or reception. You
can set this item for transmission and
reception, and point-to-point and multipoint
connections individually.
15fps: Send pictures at a maximum rate of
15 frames per second.
30fps: Send pictures at a maximum rate of
30 frames per second.
AUTO: Switch the number of frames
automatically.
62
Registering Local Information
Communication
ISDN
The menu is used to set up the
communication mode for an ISDN
connection.
Individual Settings for Point-to-Point/
Multipoint (only with PCSA-MCG80
installed)
Allows you to configure the ISDN settings
for point-to-point and multipoint
connections individually.
Communication
ISDN: Mode
ISDN Bandwidth (Dial)
Allows you to select the number of ISDN
lines used for dialing.
You can set this item for point-to-point and
multipoint connections individually.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
ISDN Bandwidth (Answer)
Allows you to select the number of ISDN
lines used for answering.
You can set this item for point-to-point and
multipoint connections individually.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party.
You can set this item for point-to-point and
multipoint connections individually.
You can select from among G.711, G.722,
G.728 and MPEG4 (MPEG4 AAC).
Notes
• When configuring multipoint connection
settings, you can only select from G.711 or
G.722.
• When the remote system does not support the
audio mode selected by the local site, the
mode automatically becomes "G.711".