Rs-232 Parameter Defaults - Symbol DS4308 Product Reference Manual

RS-232 Parameter Defaults

Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar
code(s) provided in the RS-232 Host Parameters section beginning on page 8-4.
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 8-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bits
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Note: The DS4308 supports one stop bit only.
Appendix A, Standard Default Parameters
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 8-6
9600 8-8
None 8-9
1 Stop Bit 8-10
8-Bit 8-10
Enable 8-11
None 8-11
None 8-13
2 Sec 8-15
Low RTS 8-16
Disable 8-16
0 msec 8-17
Normal Operation 8-18
Send Bar Code 8-18
RS-232 Interface
Page
Number
8 - 3