Idc Find Box Outline; Idc Minimum Text Length - Symbol DS4308 Product Reference Manual

IDC Find Box Outline

Parameter Name: Sig_FINDBOX
Parameter # 727 (SSI # F1h D7h)
Select Enable Find Box Outline to instruct the firmware to search for a rectangular border during document
capture. This parameter only applies when
*
Disable Find Box Outline
(0)

IDC Minimum Text Length

Parameter Name: DocCap_MIN_TEXT
Parameter # 656 (SSI # F1h 90h)
Specify the minimum number of characters encoded in a bar code for the IDC firmware to use it as an
anchored or linked bar code. Set this to zero (the default) to disable all checking and use all bar codes.
Scan the bar code below, followed by two bar codes from
55 decimal. The default is 00.
IDC Minimum Text Length
IDC Operating Mode is set to Anchored.
Appendix G, Numeric Bar Codes
Intelligent Document Capture 12 - 11
Enable Find Box Outline
(1)
in the range of 00 to