Event Reporting; Decode Event - Symbol DS4308 Product Reference Manual

Event Reporting

The host can request the digital scanner to provide certain information (events) relative to the digital scanner's
behavior. Enable or disable the events listed in
appropriate bar codes.
Event Codes
Table 7-4
Event Class

Decode Event

Boot Up Event
Parameter Event
Decode Event
Parameter # 256 (SSI # F0h 00h)
When enabled, the digital scanner generates a message to the host upon a successful bar code decode.
When disabled, no notification is sent.
Enable Decode Event
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is
enabled by default)
Number expected
(1)
Table 7-4 and on the following pages by scanning the
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
*Disable Decode Event
SSI Interface 7 - 21
(0)