CHAPTER 5 IMAGING PREFERENCES
Introduction
You can program the digital scanner to perform various functions, or activate different features. This chapter
describes imaging preference features and provides programming bar codes for selecting these features.
NOTE Only the Symbol Native API (SNAPI) with Imaging interface supports image capture. See
Type on page 6-5
The digital scanner ships with the settings in
Appendix A, Standard Default Parameters
suit requirements, programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in
non-volatile memory and are preserved even when you power down the digital scanner.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
To return all features to default values, scan the
programming bar code menus, asterisks (
*
Indicates Default
to enable this host.
Imaging Preferences Parameter Defaults on page 5-2
for all host device and miscellaneous defaults). If the default values
Set Factory Defaults on page
*
) indicate default values.
*
Enable Image Capture Illumination
(2)
USB Device
(also see
4-5. Throughout the
Feature/Option
Option Value