Check Isbt Table; Isbt Concatenation Redundancy - Symbol DS4308 Product Reference Manual

11 - 30 DS4308/DS4308P Digital Scanner Product Reference Guide

Check ISBT Table

Parameter # 578 (SSI # F1h 42h)
The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in
pairs. If you set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs
found in this table. Other types of ISBT codes are not concatenated.
*
Enable Check ISBT Table

ISBT Concatenation Redundancy

Parameter # 223 (SSI # DFh)
If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number of times the digital
scanner must decode an ISBT symbol before determining that there is no additional symbol.
Scan the bar code below, then scan two numeric bar codes in
between 2 and 20. Enter a leading zero for single digit numbers. To correct an error or change a selection,
scan Cancel on page G-2.
ISBT Concatenation Redundancy
(1)
The default is 10.
Disable Check ISBT Table
(0)
Appendix G, Numeric Bar Codes to set a value