Rs-232 Parameter Defaults - Symbol LS4278 Product Reference Manual

RS-232 Parameter Defaults

Table 7-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the appropriate bar code(s) provided
in the Parameter Descriptions section beginning on page 7-6.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Parameter
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits (ASCII Format)
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
for all user preferences, hosts, symbologies, and
Table 7-1. RS-232 Host Default Table
Default
Standard
9600
None
1 Stop Bit
8-Bit
Enable
None
None
2 sec
Low RTS
Disable
0 msec
Normal Operation
Send Bar Code
RS-232 Interface 7-5
Page Number
7-8
7-9
7-10
7-11
7-11
7-12
7-13
7-14
7-15
7-16
7-16
7-17
7-18
7-18