Event Reporting; Decode Event - Symbol DS6707 Product Reference Manual

6 - 14 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Event Reporting

The host can request the digital imager scanner to provide certain information (events) relative to the digital imager
scanner's behavior. Enable or disable the events listed in
appropriate bar codes.
Event Codes
Table 6-2
Event Class

Decode Event

Boot Up Event
Parameter Event
Decode Event
Parameter # F0h, 00h
When enabled, the digital imager scanner generates a message to the host when it successfully decodes a bar
code. When disabled, no notification is sent.
Enable Decode Event
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is
enabled by default)
Number expected
(01h)
Table 6-2 and on the following pages by scanning the
Code
Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
*
Disable Decode Event
(00h)