Lincoln Electric RANGER 225 GXT Service Manual page 95

F-55
ENGINE/ROTOR REMOVAL AND REPLACEMENT PROCEDURE
Service and repair should be performed only by Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician
or machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-888-935-3877.
TEST DESCRIPTION
The following procedure will aid the technician in removing the engine and/or rotor for
maintenance or replacement of either component.
NOTE: The procedures described here are for a Kohler engine. The same basic proce-
dures apply to the other engine, although there may be a few slight wiring variations.
MATERIALS NEEDED
Lincoln Electric Rotor Removal Kit (S20788) - FOR ROTOR REMOVAL ONLY
1/4" nut driver
5/16" nut driver
Slot head screw driver
3/8" wrench
7/16" wrench
1/2" wrench
9/16" wrench
5/8" wrench
Locking pliers
Needle nose pliers
Diagonal cutters
Impact wrench
Torque wrench (ft lbs)
Feeler gauge (.017)
INSTRUCTIONS
For Engine and Rotor removal only, follow steps 1-25 under ENGINE AND ROTOR
REMOVAL PROCEDURE. For reassembly of engine and rotor go to REASSEMBLY
PROCEDURE.
For rotor removal, follow the ENGINE AND ROTOR REMOVAL PROCEDURE and
ROTOR REMOVAL PROCEDURE.
TROUBLESHOOTING AND REPAIR
WARNING
RANGER® 225 GXT
F-55